B Sharp XL 10″ Sharpener

Dual Diamond 5 1/2″ (140mm) Sharpening Surface – 10″ (25.5cm) Overall –Thermoplastic Rubber Handle

Sharpening with B Sharp XL:

• Hold open tool firmly in one hand (see photo).
• Take B-Sharp and set it on the bevel of the blade (on the outside face of the blade).
• Sharpen the cutting edge by pulling B-Sharp parallel along the bevel of the blade (an angle of approx. 23°).
• Repeat until a small burr has formed at the tip of the cutting edge.
• Turn over tool and set B-Sharp flat against the inside face of the blade. Swipe once to break the burr. Your tool is now sharp.

All maintenance should be performed only by a responsible person. Keep out of reach of children!